IHF series End-Suction Centrifugal pump is a horizontal type , non-metallic chemical centrifugal pump, compliant with ISO ISO2858, DIN EN 22858.
Flow: up to 400 m3/h, max 1761 GPM
Head: 80m;410 feet
Temperature ratings from - 20 °C to +150 °C;-68°F to+302°F
The material is virgin, unfilled lining FEP， Therefore:（1）Considerably easier and more reliable quality control.(2)No reduction in the permeation resistance.(3) Pure pharmaceutical and fine chemical media: no contamination
-Robust pump casing
Pump casing and cover are made of HT200 iron lining with PFA, PTFE, impeller made by WCB wrapped by PTFA, PTFE, which grantee this type centrifugal pump could widely used in corrosive application and wear well. With ductile cast iron armouring absorbs all the hydraulic and pipeworkforces to DIN/ISO5199/Europump 1979.In contrast to partially or non-armoured plastic pumps, no expansion joints are required. Flange with service-minded through holes to DIN;ANSI,BS;JIS. For flushing system and monitoring device as required, the draining nozzle will be offered(pump housing picture)
-Reliable mechanical seal
Shaft seal is outside seal, stationary seal is alumina ceramic ( 99.9%), rotating seal is PTFE filling material or according to customer request.
corrosive slurries, solvents,
Hydrocarbons and other strong corrosive medium.
ammonia water ion film caustic soda
Acid pickling process,
Textile industry, etc
Pharmacy and Health
Chlorine water and waste water treatment,
Adding acid process.
Q: 3.6 m3/h
H: 20 m
Motor parameter: 3phase 380V 50Hz, 2900rpm.
if you need any pump, please let us to know it.